347 Stainless Steel Wire Mesh Manufacturer, Supplier and Exporter in Mumbai, India

347 stainless steel wire mesh is a woven screen made from niobium stabilised 18/8 stainless steel wire with 17.0 to 19.0% chromium and 9.0 to 13.0% nickel, supplied in rolls, cut pieces and fabricated parts. B2B buyers use it for aircraft exhaust parts, high temperature gaskets, boiler casings, furnace heating elements and chemical equipment across India.

Indo German Wire Screen Co. is one of India's most trusted manufacturers, suppliers and exporters of 347 stainless steel wire mesh. Since 1996 we have served 5,000+ industrial buyers in India and 50+ countries from our works in Andheri East, Mumbai. Every supply carries a mill test certificate for the stated grade, and our in-house team cuts and fabricates mesh into discs, filters, sieves and framed screens, with dispatch to every Indian state and export packing for overseas orders.

Material
Stainless steel 347 (UNS S34700), C 0.08% max, Cr 17.0 to 19.0%, Ni 9.0 to 13.0%, Nb 10 x C min, 1.0% max
Supply form
Rolls, cut pieces, fabricated parts
Documents
Mill test certificate, inspection report
Stabilised range
Intermittent heating at 427 to 899°C
Magnetic response
Non-magnetic, permeability 1.02 max annealed

₹850 to ₹1,500 per metre · Tentative, GST extra

The tentative price of 347 stainless steel wire mesh in India is ₹850 to ₹1,500 per metre, GST extra. The final rate depends on mesh count, wire diameter, width, quantity and the current nickel rate, and is confirmed in a written quotation.

347 Stainless Steel Wire Mesh Overview

347 stainless steel wire mesh is woven from UNS S34700, a 304 type base stabilised with niobium, also called columbium, at no less than ten times its carbon content. Niobium carbides form inside the grains instead of at grain boundaries, so the mesh resists intergranular corrosion after intermittent heating between 427 and 899°C.

  • Also calledSS 347 jali, niobium stabilised wire cloth, 1.4550
  • Made aswoven wire cloth in rolls and cut pieces
  • Holds up inintermittent heat at 427 to 899°C and hot oxidising air
  • Common inexhaust parts, gaskets and heavy wall welded equipment
  • Not forsevere corrosive media after long carbide range heating

347 Stainless Steel Wire Mesh Quality and Supply

Every roll is woven from traceable 347 wire and checked for mesh count, wire size and opening before it leaves our Mumbai works. A mill test certificate comes with each supply, so your quality team can confirm the grade without extra testing.

  • Traceable wiremill test certificate with every supply
  • Checked before dispatchmesh count, wire size and opening
  • Inspection reportshared with every supply
  • Sample pieceavailable before you place a bulk order
  • Supplied asrolls, cut pieces and fabricated parts
  • Packingseaworthy wooden case for export orders

347 Stainless Steel Wire Mesh Specifications

MaterialStainless steel 347 (UNS S34700), C 0.08% max, Cr 17.0 to 19.0%, Ni 9.0 to 13.0%, Nb 10 x C min, 1.0% max
Stabilised rangeIntermittent heating at 427 to 899°C
Magnetic responseNon-magnetic, permeability 1.02 max annealed
Wire standardASTM A580
Supply formRolls, cut pieces, fabricated parts
DocumentsMill test certificate, inspection report

HSN 7314 1410, GST 18%.

347 Stainless Steel Wire Mesh Standards, Grades

347 wire falls under ASTM A580, the woven cloth under ASTM E2016, and 347 is the niobium stabilised grade among our twelve stainless steel meshes.

Standards

  • ASTM A580 for stainless steel wire
  • ASTM E2016 for industrial woven wire cloth

Grades

  • 304general
  • 304 Llow carbon, weldable
  • 309heat resisting
  • 310high heat
  • 314high silicon
  • 316molybdenum, marine
  • 316 Llow carbon marine
  • 321titanium stabilised
  • 330high nickel
  • 347niobium stabilised
  • 410martensitic
  • 430ferritic

347 Stainless Steel Wire Mesh Key Features

347 stainless steel wire mesh is chosen for hot welded parts. Niobium binds carbon before chromium can, so weld zones and heated areas keep their corrosion resistance, and the grade adds high oxidation resistance at temperature while staying non-magnetic.

  • Niobium stabilisedcarbides form inside grains, not at boundaries
  • Weld without annealfor welding where post-weld annealing is not possible
  • Arc transferniobium crosses the welding arc, unlike titanium
  • Hot servicehigh resistance to oxidation at high temperatures
  • General corrosionsimilar to unstabilised 304
  • Non-magneticpermeability 1.02 max when annealed

347 Stainless Steel Wire Mesh Advantages

Against 321, 347 does the same carbide stabilising job with niobium, which transfers across a welding arc, so it is the standard consumable for welding 321. Against 304, it keeps weld zones free of sensitisation, which 304 can suffer in its heat affected zone.

  • Matches 321 weldsstandard filler grade for welding 321
  • Safer than 304 weldsheat affected zone stays resistant
  • Heavy wall dutyused in heavy wall welded equipment
  • Exhaust dutyaircraft exhaust stacks and collector rings

Need 347 stainless steel wire mesh in a specific mesh or size?

Tell us the mesh count, size and quantity. Our sales team replies with a written quotation, usually the same working day.

Your enquiry opens in WhatsApp, ready to send.

347 Stainless Steel Wire Mesh Applications

347 stainless steel wire mesh is used where welded parts run hot and cannot be annealed after fabrication. Indo German Wire Screen Co., an industrial wire mesh manufacturer in Mumbai, supplies 347 mesh in rolls, cut pieces and fabricated parts for exhaust, gasket, boiler and chemical plant duty. Share your application and we will suggest the right mesh, wire and finish.

  • In aerospace, 347 serves aircraft collector rings, exhaust stacks and manifolds, cabin heaters and jet engine parts, where severe corrosive conditions meet heat. 347 wire mesh is typically used for high temperature gaskets, and flexible metal hose, bellows and expansion joints also use the grade.

  • Process plants use 347 in chemical production equipment, chemical processing equipment running at high temperatures, boiler casings, furnace heating elements and heavy wall welded equipment. Nuclear processing piping and high-pressure steam pipes are further uses where weld zones must resist intergranular attack.

347 Stainless Steel Wire Mesh Applications by Industry

Our wire mesh serves 30 industries, and 347 stainless steel wire mesh is used across many of them, from exhaust and collector ring parts in the aeronautics industry to gaskets and process equipment in the chemical industry and nuclear processing plant at atomic power stations. Open any industry to see how our wire mesh is used there.

Why buyers source 347 stainless steel wire mesh from Indo German Wire Screen

Indo German Wire Screen Co. is a Mumbai wire mesh manufacturer supplying 347 stainless steel wire mesh since 1996 to 5,000+ industrial buyers in India and 50+ countries, with genuine 347 grade and in-house fabrication.

  • Genuine 347 grademill test certificate on every supply
  • Consistent weavemesh count and opening checked before dispatch
  • One supplierrolls, cut pieces and fabricated parts
  • Samples firsttest a piece before you place a bulk order
  • Clear pricingwritten quotes with GST and freight shown
  • Pan-India dispatchfrom Andheri East, Mumbai to every state

How ordering works

Ordering takes six steps, from your enquiry to delivery at site. Quotes for stock sizes usually go out the same working day.

  1. Share your requirement

    Mesh or micron, size, quantity and use. A photo also works.

  2. We check the fit

    We confirm the right grade, weave and mesh for your process.

  3. Get a written quote

    Priced per metre, sq m, kg or piece, with GST and freight shown.

  4. Approve a sample

    Sample piece and mill certificate shared on request.

  5. Production and inspection

    Mesh checked against your order before packing.

  6. Delivery across India

    Road transport or courier, with tracking details.

FAQs on Buying 347 Stainless Steel Wire Mesh in India and Overseas

Where can I buy 347 stainless steel wire mesh in India?

You can buy it directly from Indo German Wire Screen Co., a wire mesh manufacturer in Andheri East, Mumbai. We supply rolls, cut pieces and fabricated parts to buyers in every Indian state by road transport or courier.

What is the price of 347 stainless steel wire mesh per metre?

Price for 347 mesh depends on mesh count, wire diameter, roll width, quantity and the current nickel rate. Gaskets, discs and framed parts are priced per piece. We quote per metre, sq m, kg or piece; send your size and quantity for a written quote, usually the same working day.

What is the difference between 347 and 321 stainless steel wire mesh?

321 is stabilised with titanium and 347 with niobium, and both resist intergranular corrosion after heating. Titanium does not transfer well across a welding arc, so 347 is the standard consumable for welding 321. 347 also allows 9.0 to 13.0% nickel, against 9.0 to 12.0% in 321.

Do welded 347 wire mesh parts need annealing?

Usually not. 347 is considered for welding where a post-weld anneal is not possible, because niobium carbides form inside the grains instead of at the grain boundaries. Long heating in the carbide range can still reduce its resistance in severe corrosive media. Share your process, and we will confirm the grade.

Can I order a small quantity or a sample first?

Yes. For stock sizes we supply single cut pieces and samples, so you can check the weave and grade before placing a bulk order for full rolls.

Do you export stainless steel wire mesh to other countries?

Yes, to more than 50 countries across the Gulf, Africa, Asia and beyond. Export orders are packed in seaworthy wooden cases and shipped with invoice, packing list, certificate of origin and mill test certificate.

Enquire About 347 Stainless Steel Wire Mesh

Share your name and mobile number. Our sales team will call or WhatsApp you with prices and details.

Or call +91 79772 72451 sales@igwirescreen.com

Wire Mesh Products Subcategories

Indo German Wire Screen Co. makes wire mesh in 20+ metals, every common weave and shape, from 2 to 500 mesh, plus filters and screens. Pick a group to see the full range.

Check the weave before you place a bulk order

Ask for a sample piece of 347 stainless steel wire mesh with its mill test certificate, so your quality team can verify grade, wire size and opening first.

  • Sample before bulk
  • Mill test certificate
  • No fixed MOQ on stock sizes

Market Area for 347 Stainless Steel Wire Mesh

Indo German Wire Screen Co. supplies 347 stainless steel wire mesh from Mumbai to 108+ cities across India and exports to 50+ countries in the Gulf, Asia, Africa, Australia, New Zealand and South America.

Cities and countries we supplyIndia 108 cities · Gulf 7 · Asia 40 · Africa 52 · Australia and NZ 2 · South America 12

Indian cities we supply 347 stainless steel wire mesh to

  • Mumbai
  • Pune
  • Ahmedabad
  • Bengaluru
  • Chennai
  • Delhi
  • Kolkata
  • Hyderabad
  • Agra
  • Ajmer
  • Aligarh
  • Amravati
  • Amritsar
  • Asansol
  • Aurangabad
  • Bareilly
  • Belgaum
  • Bhavnagar
  • Bhilai
  • Bhiwandi
  • Bhopal
  • Bhubaneswar
  • Bikaner
  • Bilaspur
  • Bokaro Steel City
  • Chandigarh
  • Coimbatore
  • Cuttack
  • Dehradun
  • Dhanbad
  • Durgapur
  • Erode
  • Faridabad
  • Firozabad
  • Ghaziabad
  • Gorakhpur
  • Gulbarga
  • Guntur
  • Gurugram
  • Guwahati
  • Gwalior
  • Hamirpur
  • Hubli-Dharwad
  • Indore
  • Jabalpur
  • Jaipur
  • Jalandhar
  • Jalgaon
  • Jammu
  • Jamnagar
  • Jamshedpur
  • Jhansi
  • Jodhpur
  • Kakinada
  • Kannur
  • Kanpur
  • Karnal
  • Kochi
  • Kolhapur
  • Kollam
  • Kozhikode
  • Kurnool
  • Lucknow
  • Ludhiana
  • Madurai
  • Malappuram
  • Mangalore
  • Mathura
  • Meerut
  • Moradabad
  • Mysore
  • Nagpur
  • Nanded
  • Nashik
  • Nellore
  • Noida
  • Patna
  • Prayagraj
  • Puducherry
  • Purulia
  • Raipur
  • Rajamahendravaram
  • Rajkot
  • Ranchi
  • Ratlam
  • Rourkela
  • Salem
  • Sangli
  • Shimla
  • Siliguri
  • Solapur
  • Srinagar
  • Surat
  • Thanjavur
  • Thiruvananthapuram
  • Thrissur
  • Tiruchirappalli
  • Tirunelveli
  • Tiruvannamalai
  • Ujjain
  • Vadodara
  • Varanasi
  • Vasai-Virar City
  • Vellore
  • Vijayapura
  • Vijayawada
  • Visakhapatnam
  • Warangal

City or country not listed? Ask about delivery to your location

Note: Please note that the information on this document is for illustration purposes only as information may vary with individual products, their grade and applications, industries or uses and therefore cannot be guaranteed as accurate. © Copyright 2026 Indo German Wire Screen Co. All Rights Reserved (Terms of Use). Recreation of any materials from the site is strictly prohibited without permission. Indo German Wire Screen Co. products are sold exclusively through the Indo German Wire Screen Co. website. Use Terms | Privacy. Please contact us to discuss precise product specifications and requirements and obtain advice on which products are required to suit your exact application needs. Contact us at sales@igwirescreen.com

Bulk order, OEM contract or export enquiry?

Speak directly to our sales team about large quantities, repeat supply schedules, fabricated parts or shipping 347 stainless steel wire mesh overseas with export packing and documents.

  • Pan-India dispatch
  • Exports to 50+ countries
  • Since 1996

Call or WhatsApp, Monday to Friday, 9 am to 6 pm

+91 79772 72451

Get a quick quote

₹850 to ₹1,500 per metre · Tentative, GST extra

Rates follow current nickel and stainless steel prices. Quotes sent on WhatsApp, usually the same working day.

Get a quote

Tell us the mesh, size and quantity, and we reply with a quote.

What you need
Where to send the quote

We use your details only to reply to this enquiry.