410 Stainless Steel Welded Wire Mesh Manufacturer, Supplier and Exporter in Mumbai, India

410 stainless steel welded wire mesh is a rigid grid of martensitic stainless wire with 11.5 to 13.5% chromium and 0.08 to 0.15% carbon, supplied in rolls, cut pieces and fabricated parts. B2B buyers use it for parts that need high strength with moderate heat and corrosion resistance, in steam, hot gas, fresh water and mild acid service across India.

Indo German Wire Screen Co. is one of India's most trusted manufacturers, suppliers and exporters of 410 stainless steel welded wire mesh. Since 1996 we have served 5,000+ industrial buyers in India and 50+ countries from our works in Andheri East, Mumbai. Every supply carries a mill test certificate for the stated grade, and our in-house team cuts and fabricates mesh into discs, filters, sieves and framed screens, with dispatch to every Indian state and export packing for overseas orders.

Material
410 stainless steel (UNS S41000, EN 1.4006), Cr 11.5 to 13.5%, C 0.08 to 0.15%
Supply form
Rolls, cut pieces, fabricated parts
Documents
Mill test certificate, inspection report
Construction
Wires welded at each intersection
Heat resistance
Resists scaling up to about 650 °C

₹65 to ₹125 per sq ft · Tentative, GST extra

The tentative price of 410 stainless steel welded wire mesh in India is ₹65 to ₹125 per sq ft, GST extra. The final rate depends on opening size, wire diameter, width, quantity and the current stainless steel rate, and is confirmed in a written quotation.

410 Stainless Steel Welded Wire Mesh Overview

410 stainless steel welded wire mesh is made from UNS S41000 wire, the basic martensitic stainless steel, with 11.5 to 13.5% chromium. It can be hardened by quench and temper heat treatment, and reaches maximum corrosion resistance when hardened, tempered and polished. It is magnetic.

  • Also calledSS 410 weld mesh, EN 1.4006, 12% chromium mesh
  • Made asmartensitic wires welded at each intersection
  • Holds up indry air, fresh water, steam, food and hot gases
  • Common inturbine, pump, valve and fractionating tower parts
  • Not forservice at 400 to 580 °C or subzero cold

410 Stainless Steel Welded Wire Mesh Quality and Supply

Every roll is welded from traceable 410 wire and checked for mesh count, wire size and opening before it leaves our Mumbai works. A mill test certificate comes with each supply, so your quality team can confirm the grade without extra testing.

  • Traceable wiremill test certificate on every supply
  • Checked before dispatchmesh count, wire size and opening
  • Inspection reportshared with every supply
  • Sample pieceavailable before you place a bulk order
  • Supplied asrolls, cut pieces and fabricated parts
  • Packingseaworthy wooden case for export orders

410 Stainless Steel Welded Wire Mesh Specifications

Material410 stainless steel (UNS S41000, EN 1.4006), Cr 11.5 to 13.5%, C 0.08 to 0.15%
ConstructionWires welded at each intersection
Heat resistanceResists scaling up to about 650 °C
Heat treatmentHardened at 925 to 1010 °C, tempered at 200 to 400 °C
Magnetic responseMagnetic
Supply formRolls, cut pieces, fabricated parts
DocumentsMill test certificate, inspection report

HSN 7314 3900, GST 18%.

410 Stainless Steel Welded Wire Mesh Standards, Grades

ASTM A580 covers stainless steel wire including UNS S41000, and 410 is the martensitic, hardenable grade among our twelve stainless steel welded meshes.

Standards

  • ASTM A580 for stainless steel wire

Grades

  • 304general
  • 304 Llow carbon
  • 309heat
  • 310high heat
  • 314carburising
  • 316marine
  • 316 Lmarine welds
  • 321 Tistabilised
  • 330thermal shock
  • 347 Nbstabilised
  • 410martensitic
  • 430ferritic

410 Stainless Steel Welded Wire Mesh Key Features

410 welded mesh is chosen for strength. As a martensitic grade it can be hardened by quench and temper, reaching about 1310 MPa tensile strength after a 204 °C temper, and it resists dry air, fresh water, steam and hot gases.

  • Hardenableby quench and temper heat treatment
  • High tempered strengthabout 1310 MPa after a 204 °C temper
  • Scaling resistancegood up to about 650 °C
  • Mild mediafresh water, steam, food, mild acids and alkalies
  • Magneticmartensitic structure attracts a magnet

410 Stainless Steel Welded Wire Mesh Advantages

Against 430, 410 trades some corrosion resistance for hardenability, since it can be quenched and tempered to high strength. Austenitic grades such as 316 and 321 cannot be hardened by thermal treatment, so 410 is the welded mesh grade when heat treated strength matters.

  • Heat treatablehardens by quench and temper, unlike 316
  • Strength on demandtempering sets hardness and strength
  • Magnetic gridresponds to magnets, unlike annealed 316
  • Clean cut edgescut into shapes without fraying

Need 410 stainless steel welded wire mesh in a specific mesh or size?

Tell us the opening size, wire diameter, size and quantity. Our sales team replies with a written quotation, usually the same working day.

Your enquiry opens in WhatsApp, ready to send.

410 Stainless Steel Welded Wire Mesh Applications

410 stainless steel welded wire mesh is used where a stainless grid needs higher strength than austenitic grades and the duty is dry, fresh water or mildly corrosive. Indo German Wire Screen Co., an industrial wire mesh manufacturer in Mumbai, supplies 410 welded mesh in rolls, cut pieces and fabricated parts for strength and moderate heat duty. Share your application and we will suggest the right mesh, wire and finish.

  • The alloy is used in steam and gas turbine parts, pump and valve parts and shafts, petroleum fractionating towers and mine ladder rungs. These are dry air, fresh water, steam and hot gas services, the conditions 410 resists, and a smooth surface finish improves its performance.

  • Service temperature sets the limits for 410. It resists scaling up to about 650 °C but is generally not recommended between 400 and 580 °C, where mechanical properties fall, and martensitic grades lose ductility at subzero temperatures.

410 Stainless Steel Welded Wire Mesh Applications by Industry

Our wire mesh serves 30 industries, and 410 stainless steel welded wire mesh is used across many of them, from strength parts in the mining sector and coal mines industries to steam service parts in dryers industries and fractionating tower parts in the chemical industry. Open any industry to see how our wire mesh is used there.

Why buyers source 410 stainless steel welded wire mesh from Indo German Wire Screen

Indo German Wire Screen Co. is a Mumbai wire mesh manufacturer supplying 410 stainless steel welded wire mesh since 1996 to 5,000+ industrial buyers in India and 50+ countries, with genuine 410 grade and in-house fabrication.

  • Genuine 410 grademill test certificate on every supply
  • Consistent meshmesh count and opening checked before dispatch
  • One supplierrolls, cut pieces and fabricated parts
  • Samples firsttest a piece before you place a bulk order
  • Clear pricingwritten quotes with GST and freight shown
  • Pan-India dispatchfrom Andheri East, Mumbai to every state

How ordering works

Ordering takes six steps, from your enquiry to delivery at site. Quotes for stock sizes usually go out the same working day.

  1. Share your requirement

    Grade, opening, wire diameter, size, quantity and use. A photo also works.

  2. We check the fit

    We confirm the right grade, wire size and opening for your process.

  3. Get a written quote

    Priced per metre, sq m, kg or piece, with GST and freight shown.

  4. Approve a sample

    Sample piece and mill certificate shared on request.

  5. Production and inspection

    Mesh checked against your order before packing.

  6. Delivery across India

    Road transport or courier, with tracking details.

FAQs on Buying 410 Stainless Steel Welded Wire Mesh in India and Overseas

Where can I buy 410 stainless steel welded wire mesh in India?

You can buy it directly from Indo German Wire Screen Co., a wire mesh manufacturer in Andheri East, Mumbai. We supply rolls, cut pieces and fabricated parts to buyers in every Indian state by road transport or courier.

What is the price of 410 stainless steel welded wire mesh per sq ft?

410 is a chromium martensitic grade, so it is usually priced at or below 304. The rate follows opening, wire diameter, width, quantity and current stainless steel rates. We quote per sq ft, sq m, kg or piece, usually the same working day.

What is the difference between 410 and 430 stainless steel welded wire mesh?

410 is martensitic with 11.5 to 13.5% chromium and can be hardened by quench and temper. 430 is ferritic with 16.0 to 18.0% chromium and cannot be hardened by heat treatment. 410 has less corrosion resistance than 430, so choose 410 for strength and 430 for mild corrosion duty.

Does 410 stainless steel welded wire mesh need heat treatment after welding?

Fusion welding of 410 needs a pre-heat of 150 to 260 °C and a post-weld anneal to reduce the possibility of cracking. Where parts stay as welded, grade 309 filler rods give a ductile joint. Share how the mesh will be framed, and we will suggest the wire size and opening.

Can I order a small quantity or a sample first?

Yes. For stock sizes we supply single cut pieces and samples, so you can check the mesh and grade before placing a bulk order for full rolls.

Do you export stainless steel welded wire mesh to other countries?

Yes, to more than 50 countries across the Gulf, Africa, Asia and beyond. Export orders are packed in seaworthy wooden cases and shipped with invoice, packing list, certificate of origin and mill test certificate.

Enquire About 410 Stainless Steel Welded Wire Mesh

Share your name and mobile number. Our sales team will call or WhatsApp you with prices and details.

Or call +91 79772 72451 sales@igwirescreen.com

Wire Mesh Products Subcategories

Indo German Wire Screen Co. makes wire mesh in 20+ metals, every common weave and shape, from 2 to 500 mesh, plus filters and screens. Pick a group to see the full range.

Check the mesh before you place a bulk order

Ask for a sample piece of 410 stainless steel welded wire mesh with its mill test certificate, so your quality team can verify grade, wire size and opening first.

  • Sample before bulk
  • Mill test certificate
  • No fixed MOQ on stock sizes

Market Area for 410 Stainless Steel Welded Wire Mesh

Indo German Wire Screen Co. supplies 410 stainless steel welded wire mesh from Mumbai to 108+ cities across India and exports to 50+ countries in the Gulf, Asia, Africa, Australia, New Zealand and South America.

Cities and countries we supplyIndia 108 cities · Gulf 7 · Asia 40 · Africa 52 · Australia and NZ 2 · South America 12

Indian cities we supply 410 stainless steel welded wire mesh to

  • Mumbai
  • Pune
  • Ahmedabad
  • Bengaluru
  • Chennai
  • Delhi
  • Kolkata
  • Hyderabad
  • Agra
  • Ajmer
  • Aligarh
  • Amravati
  • Amritsar
  • Asansol
  • Aurangabad
  • Bareilly
  • Belgaum
  • Bhavnagar
  • Bhilai
  • Bhiwandi
  • Bhopal
  • Bhubaneswar
  • Bikaner
  • Bilaspur
  • Bokaro Steel City
  • Chandigarh
  • Coimbatore
  • Cuttack
  • Dehradun
  • Dhanbad
  • Durgapur
  • Erode
  • Faridabad
  • Firozabad
  • Ghaziabad
  • Gorakhpur
  • Gulbarga
  • Guntur
  • Gurugram
  • Guwahati
  • Gwalior
  • Hamirpur
  • Hubli-Dharwad
  • Indore
  • Jabalpur
  • Jaipur
  • Jalandhar
  • Jalgaon
  • Jammu
  • Jamnagar
  • Jamshedpur
  • Jhansi
  • Jodhpur
  • Kakinada
  • Kannur
  • Kanpur
  • Karnal
  • Kochi
  • Kolhapur
  • Kollam
  • Kozhikode
  • Kurnool
  • Lucknow
  • Ludhiana
  • Madurai
  • Malappuram
  • Mangalore
  • Mathura
  • Meerut
  • Moradabad
  • Mysore
  • Nagpur
  • Nanded
  • Nashik
  • Nellore
  • Noida
  • Patna
  • Prayagraj
  • Puducherry
  • Purulia
  • Raipur
  • Rajamahendravaram
  • Rajkot
  • Ranchi
  • Ratlam
  • Rourkela
  • Salem
  • Sangli
  • Shimla
  • Siliguri
  • Solapur
  • Srinagar
  • Surat
  • Thanjavur
  • Thiruvananthapuram
  • Thrissur
  • Tiruchirappalli
  • Tirunelveli
  • Tiruvannamalai
  • Ujjain
  • Vadodara
  • Varanasi
  • Vasai-Virar City
  • Vellore
  • Vijayapura
  • Vijayawada
  • Visakhapatnam
  • Warangal

City or country not listed? Ask about delivery to your location

Note: Please note that the information on this document is for illustration purposes only as information may vary with individual products, their grade and applications, industries or uses and therefore cannot be guaranteed as accurate. © Copyright 2026 Indo German Wire Screen Co. All Rights Reserved (Terms of Use). Recreation of any materials from the site is strictly prohibited without permission. Indo German Wire Screen Co. products are sold exclusively through the Indo German Wire Screen Co. website. Use Terms | Privacy. Please contact us to discuss precise product specifications and requirements and obtain advice on which products are required to suit your exact application needs. Contact us at sales@igwirescreen.com

Bulk order, OEM contract or export enquiry?

Speak directly to our sales team about large quantities, repeat supply schedules, fabricated parts or shipping 410 stainless steel welded wire mesh overseas with export packing and documents.

  • Pan-India dispatch
  • Exports to 50+ countries
  • Since 1996

Call or WhatsApp, Monday to Friday, 9 am to 6 pm

+91 79772 72451

Get a quick quote

₹65 to ₹125 per sq ft · Tentative, GST extra

Rates follow current chromium and stainless steel prices. Quotes sent on WhatsApp, usually the same working day.

Get a quote

Tell us the mesh, size and quantity, and we reply with a quote.

What you need
Where to send the quote

We use your details only to reply to this enquiry.