Carbon Steel Demister Pad Manufacturer, Supplier and Exporter in Mumbai, India

A carbon steel demister pad is a mist eliminator made from layers of knitted carbon steel wire, plain or galvanised, held between support grids and supplied as fabricated pads. B2B buyers use it in knockout drums, compressor interstage drums, separators and clean gas scrubbers working in moderate, non-aggressive service across India.

Indo German Wire Screen Co. is one of India's most trusted manufacturers, suppliers and exporters of carbon steel demister pad. Since 1996 we have served 5,000+ industrial buyers in India and 50+ countries from our works in Andheri East, Mumbai. Every supply carries a mill test certificate for the stated grade, and our in-house team cuts and fabricates mesh into discs, filters, sieves and framed screens, with dispatch to every Indian state and export packing for overseas orders.

Material
Carbon steel wire, plain or galvanised
Supply form
Fabricated pads, cut pieces
Documents
Mill test certificate, inspection report
Construction
Crimped knitted wire mesh layers framed with support grids
Wire diameter
Typically 0.006 to 0.011 inch knitted wire

₹250 to ₹450 per kg · Tentative, GST extra

The tentative price of carbon steel demister pad in India is ₹250 to ₹450 per kg, GST extra. The final rate depends on pad size and thickness, mesh density, plain or galvanised wire, quantity and the current steel rate, and is confirmed in a written quotation.

Both pads share the same knitted mesh design. Carbon steel keeps cost down where the gas is non-aggressive, while stainless steel resists rust and chemical attack in wet or corrosive vapour. View all demister pads

Carbon Steel Demister Pad Overview

A carbon steel demister pad uses the same crimped, knitted wire mesh layers as other metal pads, framed with a grid on each face. Carbon steel lacks the 10.5% chromium that gives stainless steel its passive film, so in moist air it rusts by general attack unless the wire is galvanised.

  • Also calledCS mist eliminator, mesh pad, demister, mist extractor
  • Made ascrimped knitted mesh layers between support grids
  • Holds up inmoderate, non-aggressive gas and vapour conditions
  • Common inknockout drums, compressor drums and clean gas scrubbers
  • Finishplain or galvanised wire
  • Not forwet corrosive gas, where slow corrosion destroys thin wire

Carbon Steel Demister Pad Quality and Supply

Every demister pad is made from traceable carbon steel wire, and the wire size is checked before the pad leaves our Mumbai works. A mill test certificate comes with each supply, so your quality team can confirm the grade without extra testing.

  • Traceable wiremill test certificate on every supply
  • Inspection reportshared with every supply
  • Sample pieceavailable before you place a bulk order
  • Supplied asfabricated pads and cut pieces
  • Export packingseaworthy wooden case with shipping documents

Carbon Steel Demister Pad Specifications

MaterialCarbon steel wire, plain or galvanised
ConstructionCrimped knitted wire mesh layers framed with support grids
Wire diameterTypically 0.006 to 0.011 inch knitted wire
Mesh density9 lb/ft³ is the most common metal mesh density
Liquid loadUp to about one US gallon per square foot
Supply formFabricated pads, cut pieces
DocumentsMill test certificate, inspection report

Carbon Steel Demister Pad Key Features

The pad works by impingement. Gas flows freely through the knitted mesh, while droplets carried by inertia strike the wires, coalesce and drain by gravity. Carbon steel gives this mechanism a low cost wire, and galvanised wire suits moderate conditions.

  • Impingement capturedroplets strike the wires and coalesce
  • Mist rangemost common choice for 3 to 20 micron droplets
  • Low pressure dropa few inches of water when properly sized
  • Liquid handlingabout one US gallon per square foot
  • Galvanised optioneconomical for moderate, non-aggressive conditions
  • Grid supporthigh open area grids on each face

Carbon Steel Demister Pad Advantages

Against a stainless steel pad, carbon steel lowers the material cost for clean, non-corrosive gas. Against gravity settling alone, a mesh pad in a knockout drum catches far smaller drops, so vessels can be lighter and product loss lower.

  • Lower material costcarbon steel generally costs less than stainless steel
  • Lighter knockout drumsvessel weights can drop to about half
  • Finer than gravitystops drops larger than 5 to 10 micron
  • Low installed costhigh separation efficiency at the lowest installed cost

Need a carbon steel demister pad in a specific size?

Tell us the vessel diameter or pad size, the thickness and the quantity. Our sales team replies with a written quotation, usually the same working day.

Your enquiry opens in WhatsApp, ready to send.

Carbon Steel Demister Pad Applications

A carbon steel demister pad is used where liquid droplets must be removed from a gas that will not corrode plain or galvanised steel wire. Indo German Wire Screen Co., an industrial wire mesh manufacturer in Mumbai, supplies carbon steel pads fabricated for knockout drums, separators and scrubbers. Share your application and we will suggest the right mesh, wire and finish.

  • Knockout drums that rely only on gravity settling remove only drops larger than 100 microns. Fitting a mesh pad stops all drops larger than 5 to 10 microns, reduces product loss and lowers equipment cost, as vessel weights can be cut to about half. Carbon steel keeps this upgrade economical where the gas is non-aggressive.

  • In petrochemical plants, mesh pads in the interstage knockout drums of compressor trains extend compressor run length and service life. A carbon steel pad suits these drums when the gas carries no corrosive liquid. Where wet acid gas or chlorides are present, a corrosion rate that is harmless to the vessel wall can destroy thin mesh wire, so stainless steel is the safer choice.

Carbon Steel Demister Pad Applications by Industry

Our wire mesh serves 30 industries, and carbon steel demister pad is used across many of them where the gas is non-aggressive, from compressor knockout drums in the chemical industry to mist removal in the mining sector and the agriculture sector. Open any industry to see how our wire mesh is used there.

Why buyers source carbon steel demister pad from Indo German Wire Screen

Indo German Wire Screen Co. is a Mumbai wire mesh manufacturer supplying carbon steel demister pad since 1996 to 5,000+ industrial buyers in India and 50+ countries, with certified carbon steel wire and in-house fabrication.

  • Certified wiremill test certificate on every supply
  • One supplierfabricated pads, cut pieces and wire mesh parts
  • Samples firsttest a piece before you place a bulk order
  • Clear pricingwritten quotes with GST and freight shown
  • Pan-India dispatchfrom Andheri East, Mumbai to every state

How ordering works

Ordering takes six steps, from your enquiry to delivery at site. Quotes for stock sizes usually go out the same working day.

  1. Share your requirement

    Pad size or vessel diameter, thickness, quantity and service. A photo or drawing also works.

  2. We check the fit

    We confirm the right material, wire and mesh density for your process.

  3. Get a written quote

    Priced per metre, sq m, kg or piece, with GST and freight shown.

  4. Approve a sample

    Sample piece and mill certificate shared on request.

  5. Production and inspection

    Pads checked against your order before packing.

  6. Delivery across India

    Road transport or courier, with tracking details.

FAQs on Buying Carbon Steel Demister Pad in India and Overseas

Where can I buy carbon steel demister pad in India?

You can buy it directly from Indo German Wire Screen Co., a wire mesh manufacturer in Andheri East, Mumbai. We supply fabricated demister pads and other wire mesh parts to buyers in every Indian state by road transport or courier.

What is the price of carbon steel demister pad per kg?

The price depends on pad size and thickness, mesh density, plain or galvanised wire, quantity and the current steel rate. We quote per kg or per piece. Share the vessel diameter and service, and we reply with a written quote, usually the same working day.

What is the difference between carbon steel and stainless steel demister pads?

Both use the same knitted mesh design. Stainless steel contains at least 10.5% chromium, which forms a passive film and stops general rusting, while carbon steel rusts when moisture and oxygen are present. Carbon steel generally costs less, so it suits moderate, non-aggressive service.

Will a carbon steel demister pad corrode in service?

It can, if the gas is wet or corrosive. A corrosion rate of 0.005 inch a year does little harm to a vessel wall but quickly destroys mesh wire of 0.006 or 0.011 inch. Galvanised wire suits moderate conditions. Share your gas and liquid details, and we will confirm the material.

Can I order a small quantity or a sample first?

Yes. For stock sizes we supply single pieces and samples, so you can check the wire and grade before placing a bulk order.

Do you export demister pads to other countries?

Yes, to more than 50 countries across the Gulf, Africa, Asia and beyond. Export orders are packed in seaworthy wooden cases and shipped with invoice, packing list, certificate of origin and mill test certificate.

Enquire About Carbon Steel Demister Pad

Share your name and mobile number. Our sales team will call or WhatsApp you with prices and details.

Or call +91 79772 72451 sales@igwirescreen.com

Wire Mesh Products Subcategories

Indo German Wire Screen Co. makes wire mesh in 20+ metals, every common weave and shape, from 2 to 500 mesh, plus filters and screens. Pick a group to see the full range.

Check the material before you place a bulk order

Ask for a sample piece of carbon steel demister pad with its mill test certificate, so your quality team can verify grade and wire size first.

  • Sample before bulk
  • Mill test certificate
  • No fixed MOQ on stock sizes

Market Area for Carbon Steel Demister Pad

Indo German Wire Screen Co. supplies carbon steel demister pad from Mumbai to 108+ cities across India and exports to 50+ countries in the Gulf, Asia, Africa, Australia, New Zealand and South America.

Cities and countries we supplyIndia 108 cities · Gulf 7 · Asia 40 · Africa 52 · Australia and NZ 2 · South America 12

Indian cities we supply carbon steel demister pad to

  • Mumbai
  • Pune
  • Ahmedabad
  • Bengaluru
  • Chennai
  • Delhi
  • Kolkata
  • Hyderabad
  • Agra
  • Ajmer
  • Aligarh
  • Amravati
  • Amritsar
  • Asansol
  • Aurangabad
  • Bareilly
  • Belgaum
  • Bhavnagar
  • Bhilai
  • Bhiwandi
  • Bhopal
  • Bhubaneswar
  • Bikaner
  • Bilaspur
  • Bokaro Steel City
  • Chandigarh
  • Coimbatore
  • Cuttack
  • Dehradun
  • Dhanbad
  • Durgapur
  • Erode
  • Faridabad
  • Firozabad
  • Ghaziabad
  • Gorakhpur
  • Gulbarga
  • Guntur
  • Gurugram
  • Guwahati
  • Gwalior
  • Hamirpur
  • Hubli-Dharwad
  • Indore
  • Jabalpur
  • Jaipur
  • Jalandhar
  • Jalgaon
  • Jammu
  • Jamnagar
  • Jamshedpur
  • Jhansi
  • Jodhpur
  • Kakinada
  • Kannur
  • Kanpur
  • Karnal
  • Kochi
  • Kolhapur
  • Kollam
  • Kozhikode
  • Kurnool
  • Lucknow
  • Ludhiana
  • Madurai
  • Malappuram
  • Mangalore
  • Mathura
  • Meerut
  • Moradabad
  • Mysore
  • Nagpur
  • Nanded
  • Nashik
  • Nellore
  • Noida
  • Patna
  • Prayagraj
  • Puducherry
  • Purulia
  • Raipur
  • Rajamahendravaram
  • Rajkot
  • Ranchi
  • Ratlam
  • Rourkela
  • Salem
  • Sangli
  • Shimla
  • Siliguri
  • Solapur
  • Srinagar
  • Surat
  • Thanjavur
  • Thiruvananthapuram
  • Thrissur
  • Tiruchirappalli
  • Tirunelveli
  • Tiruvannamalai
  • Ujjain
  • Vadodara
  • Varanasi
  • Vasai-Virar City
  • Vellore
  • Vijayapura
  • Vijayawada
  • Visakhapatnam
  • Warangal

City or country not listed? Ask about delivery to your location

Note: Please note that the information on this document is for illustration purposes only as information may vary with individual products, their grade and applications, industries or uses and therefore cannot be guaranteed as accurate. © Copyright 2026 Indo German Wire Screen Co. All Rights Reserved (Terms of Use). Recreation of any materials from the site is strictly prohibited without permission. Indo German Wire Screen Co. products are sold exclusively through the Indo German Wire Screen Co. website. Use Terms | Privacy. Please contact us to discuss precise product specifications and requirements and obtain advice on which products are required to suit your exact application needs. Contact us at sales@igwirescreen.com

Bulk order, OEM contract or export enquiry?

Speak directly to our sales team about large quantities, repeat supply schedules, fabricated parts or shipping carbon steel demister pad overseas with export packing and documents.

  • Pan-India dispatch
  • Exports to 50+ countries
  • Since 1996

Call or WhatsApp, Monday to Friday, 9 am to 6 pm

+91 79772 72451

Get a quick quote

₹250 to ₹450 per kg · Tentative, GST extra

Rates follow current steel wire prices. Quotes sent on WhatsApp, usually the same working day.

Get a quote

Tell us the mesh, size and quantity, and we reply with a quote.

What you need
Where to send the quote

We use your details only to reply to this enquiry.