Inconel 718 Wire Mesh Manufacturer, Supplier and Exporter in Mumbai, India

Inconel 718 wire mesh is a woven screen made from alloy 718 wire, an age-hardenable nickel-chromium alloy with 50 to 55% nickel, 17 to 21% chromium and 4.75 to 5.50% niobium, supplied in rolls, cut pieces and fabricated parts. B2B buyers use it in gas turbine, rocket engine, cryogenic and instrumentation work across India.

Indo German Wire Screen Co. is one of India's most trusted manufacturers, suppliers and exporters of Inconel 718 wire mesh. Since 1996 we have served 5,000+ industrial buyers in India and 50+ countries from our works in Andheri East, Mumbai. Every supply carries a mill test certificate for the stated grade, and our in-house team cuts and fabricates mesh into discs, filters, sieves and framed screens, with dispatch to every Indian state and export packing for overseas orders.

Material
Inconel 718 (UNS N07718, W.Nr. 2.4668), Ni 50 to 55%, Cr 17 to 21%, Nb 4.75 to 5.50%, Mo 2.80 to 3.30%, Fe balance
Supply form
Rolls, cut pieces, fabricated parts
Documents
Mill test certificate, inspection report
Melting range
1260 to 1336 °C
Condition
Solution annealed, precipitation hardenable

₹9,500 to ₹16,500 per metre · Tentative, GST extra

The tentative price of Inconel 718 wire mesh in India is ₹9,500 to ₹16,500 per metre, GST extra. The final rate depends on mesh count, wire diameter, width, quantity, heat treatment and the current nickel rate, and is confirmed in a written quotation.

718 is the age-hardened, high-strength grade. 600 covers general heat and corrosion, 601 is made for oxidising furnace air, 617 holds strength above 980 °C, and 625 resists seawater and acids. View all Inconel wire mesh

Inconel 718 Wire Mesh Overview

Inconel 718 wire mesh is woven from alloy 718 (UNS N07718), with 50 to 55% nickel, 17 to 21% chromium, 4.75 to 5.50% niobium, 2.80 to 3.30% molybdenum and the balance iron. It is precipitation hardened for good tensile, fatigue, creep and rupture strength, and is used from -253 to 704 °C.

  • Also calledalloy 718, W.Nr. 2.4668
  • Made aswoven wire cloth in rolls and cut pieces
  • Holds up incryogenic cold up to 704 °C under load
  • Common ingas turbine, rocket and cryogenic components
  • Not forservice above 704 °C, its upper service limit

Inconel 718 Wire Mesh Quality and Supply

Every roll is woven from traceable 718 wire and checked for mesh count, wire size and opening before it leaves our Mumbai works. A mill test certificate comes with each supply, so your quality team can confirm the grade without extra testing.

  • Traceable wiremill test certificate for the 718 grade
  • Checked before dispatchmesh count, wire size and opening
  • Inspection reportshared with every supply
  • Sample pieceavailable before you place a bulk order
  • Supplied asrolls, cut pieces and fabricated parts
  • Export packingseaworthy wooden case with full documents

Inconel 718 Wire Mesh Specifications

MaterialInconel 718 (UNS N07718, W.Nr. 2.4668), Ni 50 to 55%, Cr 17 to 21%, Nb 4.75 to 5.50%, Mo 2.80 to 3.30%, Fe balance
Melting range1260 to 1336 °C
ConditionSolution annealed, precipitation hardenable
Wire standardAMS 5962
Supply formRolls, cut pieces, fabricated parts
DocumentsMill test certificate, inspection report

HSN 7508 1000, GST 18%.

Inconel 718 Wire Mesh Standards, Grades

Alloy 718 wire is made to AMS 5962, and 718 is the age-hardened, high-strength grade among our five Inconel meshes.

Standards

  • AMS 5962 for alloy 718 bars and wire

Grades

  • 600general heat and corrosion
  • 601oxidation
  • 617creep strength
  • 625seawater and acids
  • 718age hardened

Inconel 718 Wire Mesh Key Features

Inconel 718 wire mesh is chosen for strength. Gamma prime and gamma double-prime precipitates harden the alloy, its slow response to age hardening lets parts be welded and directly aged without an intermediate stress relief, and its resistance to postweld cracking is high.

  • Age hardenablehardened by gamma prime and gamma double-prime phases
  • High strengthgood tensile, fatigue, creep and rupture strength
  • Weldabilityhigh resistance to postweld cracking
  • Wide temperature range-253 to 704 °C
  • Spring serviceexcellent relaxation resistance up to 593 °C
  • Fabricablereadily made into complex parts

Inconel 718 Wire Mesh Advantages

Against solid-solution grades such as 600 and 625, 718 can be precipitation hardened, so it reaches high strength after solution annealing and ageing. It pairs this with easy fabrication into complex parts and welds that can be aged directly, which suits welded mesh assemblies.

  • Can be age hardenedunlike solid-solution 600 and 625
  • Cryogenic serviceused down to -253 °C
  • Weld integrityhigh resistance to postweld cracking
  • Direct ageingwelded parts aged without intermediate stress relief

Need Inconel 718 wire mesh in a specific mesh or size?

Tell us the mesh count, size and quantity. Our sales team replies with a written quotation, usually the same working day.

Your enquiry opens in WhatsApp, ready to send.

Inconel 718 Wire Mesh Applications

Inconel 718 wire mesh is used where a mesh part must stay strong under load, from cryogenic cold to hot engine sections. Indo German Wire Screen Co., an industrial wire mesh manufacturer in Mumbai, supplies 718 mesh in rolls, cut pieces and fabricated parts for turbine, rocket and cryogenic work. Share your application and we will suggest the right mesh, wire and finish.

  • In aerospace and power, alloy 718 is used for liquid-fuelled rocket components and for rings, casings and formed sheet metal parts in aircraft and land-based gas turbine engines, where tensile, fatigue, creep and rupture strength all matter. 718 mesh suits formed screens and guards for this equipment.

  • At low temperatures, the alloy is used for cryogenic tankage and serves down to -253 °C. Its relaxation resistance has made it a spring material up to 593 °C, and it is also used for fasteners and instrumentation parts.

Inconel 718 Wire Mesh Applications by Industry

Our wire mesh serves 30 industries, and Inconel 718 wire mesh is used across many of them, from rocket and gas turbine components in the aeronautics industry to fasteners and instrumentation parts in the fabrication industry and cryogenic tank parts in the chemical industry. Open any industry to see how our wire mesh is used there.

Why buyers source Inconel 718 wire mesh from Indo German Wire Screen

Indo German Wire Screen Co. is a Mumbai wire mesh manufacturer supplying Inconel 718 wire mesh since 1996 to 5,000+ industrial buyers in India and 50+ countries, with genuine 718 grade and in-house fabrication.

  • Genuine 718 grademill test certificate on every supply
  • Consistent weavemesh count, wire size and opening checked
  • One supplierrolls, cut pieces, discs and framed screens
  • Samples firstcheck a piece before the bulk order
  • Clear pricingwritten quotes showing GST and freight
  • Pan-India dispatchroad or courier from Andheri East, Mumbai

How ordering works

Ordering takes six steps, from your enquiry to delivery at site. Quotes for stock sizes usually go out the same working day.

  1. Share your requirement

    Mesh or micron, size, quantity and use. A photo also works.

  2. We check the fit

    We confirm the right grade, weave and mesh for your process.

  3. Get a written quote

    Priced per metre, sq m, kg or piece, with GST and freight shown.

  4. Approve a sample

    Sample piece and mill certificate shared on request.

  5. Production and inspection

    Mesh checked against your order before packing.

  6. Delivery across India

    Road transport or courier, with tracking details.

FAQs on Buying Inconel 718 Wire Mesh in India and Overseas

Where can I buy Inconel 718 wire mesh in India?

You can buy it directly from Indo German Wire Screen Co., a wire mesh manufacturer in Andheri East, Mumbai. We supply rolls, cut pieces and fabricated parts to buyers in every Indian state by road transport or courier.

What is the price of Inconel 718 wire mesh per metre?

The price depends on mesh count, wire diameter, width, quantity, any heat treatment and the current nickel rate. We quote per metre, sq m, kg or piece. Tell us the size, quantity and condition, and we reply with a written quote, usually the same working day.

What is the difference between Inconel 718 and 600 wire mesh?

600 is a solid-solution alloy with at least 72% nickel and is strengthened only by cold work. 718 has 50 to 55% nickel and 4.75 to 5.50% niobium and is precipitation hardened for high strength. Choose 600 for heat and corrosion duty to above 1095 °C and 718 for high-strength parts up to 704 °C.

Can Inconel 718 wire mesh be used at cryogenic temperatures?

Yes. Alloy 718 is used from -253 °C up to 704 °C, and it is used for cryogenic tankage and liquid-fuelled rocket components. Share the operating temperature and load, and we will suggest the mesh count and wire size.

Can I order a small quantity or a sample first?

Yes. For stock sizes we supply single cut pieces and samples, so you can check the weave and grade before placing a bulk order for full rolls.

Do you export Inconel wire mesh to other countries?

Yes, to more than 50 countries across the Gulf, Africa, Asia and beyond. Export orders are packed in seaworthy wooden cases and shipped with invoice, packing list, certificate of origin and mill test certificate.

Enquire About Inconel 718 Wire Mesh

Share your name and mobile number. Our sales team will call or WhatsApp you with prices and details.

Or call +91 79772 72451 sales@igwirescreen.com

Wire Mesh Products Subcategories

Indo German Wire Screen Co. makes wire mesh in 20+ metals, every common weave and shape, from 2 to 500 mesh, plus filters and screens. Pick a group to see the full range.

Check the weave before you place a bulk order

Ask for a sample piece of Inconel 718 wire mesh with its mill test certificate, so your quality team can verify grade, wire size and opening first.

  • Sample before bulk
  • Mill test certificate
  • No fixed MOQ on stock sizes

Market Area for Inconel 718 Wire Mesh

Indo German Wire Screen Co. supplies Inconel 718 wire mesh from Mumbai to 108+ cities across India and exports to 50+ countries in the Gulf, Asia, Africa, Australia, New Zealand and South America.

Cities and countries we supplyIndia 108 cities · Gulf 7 · Asia 40 · Africa 52 · Australia and NZ 2 · South America 12

Indian cities we supply Inconel 718 wire mesh to

  • Mumbai
  • Pune
  • Ahmedabad
  • Bengaluru
  • Chennai
  • Delhi
  • Kolkata
  • Hyderabad
  • Agra
  • Ajmer
  • Aligarh
  • Amravati
  • Amritsar
  • Asansol
  • Aurangabad
  • Bareilly
  • Belgaum
  • Bhavnagar
  • Bhilai
  • Bhiwandi
  • Bhopal
  • Bhubaneswar
  • Bikaner
  • Bilaspur
  • Bokaro Steel City
  • Chandigarh
  • Coimbatore
  • Cuttack
  • Dehradun
  • Dhanbad
  • Durgapur
  • Erode
  • Faridabad
  • Firozabad
  • Ghaziabad
  • Gorakhpur
  • Gulbarga
  • Guntur
  • Gurugram
  • Guwahati
  • Gwalior
  • Hamirpur
  • Hubli-Dharwad
  • Indore
  • Jabalpur
  • Jaipur
  • Jalandhar
  • Jalgaon
  • Jammu
  • Jamnagar
  • Jamshedpur
  • Jhansi
  • Jodhpur
  • Kakinada
  • Kannur
  • Kanpur
  • Karnal
  • Kochi
  • Kolhapur
  • Kollam
  • Kozhikode
  • Kurnool
  • Lucknow
  • Ludhiana
  • Madurai
  • Malappuram
  • Mangalore
  • Mathura
  • Meerut
  • Moradabad
  • Mysore
  • Nagpur
  • Nanded
  • Nashik
  • Nellore
  • Noida
  • Patna
  • Prayagraj
  • Puducherry
  • Purulia
  • Raipur
  • Rajamahendravaram
  • Rajkot
  • Ranchi
  • Ratlam
  • Rourkela
  • Salem
  • Sangli
  • Shimla
  • Siliguri
  • Solapur
  • Srinagar
  • Surat
  • Thanjavur
  • Thiruvananthapuram
  • Thrissur
  • Tiruchirappalli
  • Tirunelveli
  • Tiruvannamalai
  • Ujjain
  • Vadodara
  • Varanasi
  • Vasai-Virar City
  • Vellore
  • Vijayapura
  • Vijayawada
  • Visakhapatnam
  • Warangal

City or country not listed? Ask about delivery to your location

Note: Please note that the information on this document is for illustration purposes only as information may vary with individual products, their grade and applications, industries or uses and therefore cannot be guaranteed as accurate. © Copyright 2026 Indo German Wire Screen Co. All Rights Reserved (Terms of Use). Recreation of any materials from the site is strictly prohibited without permission. Indo German Wire Screen Co. products are sold exclusively through the Indo German Wire Screen Co. website. Use Terms | Privacy. Please contact us to discuss precise product specifications and requirements and obtain advice on which products are required to suit your exact application needs. Contact us at sales@igwirescreen.com

Bulk order, OEM contract or export enquiry?

Speak directly to our sales team about large quantities, repeat supply schedules, fabricated parts or shipping Inconel 718 wire mesh overseas with export packing and documents.

  • Pan-India dispatch
  • Exports to 50+ countries
  • Since 1996

Call or WhatsApp, Monday to Friday, 9 am to 6 pm

+91 79772 72451

Get a quick quote

₹9,500 to ₹16,500 per metre · Tentative, GST extra

Rates follow current nickel (LME) prices. Quotes sent on WhatsApp, usually the same working day.

Get a quote

Tell us the mesh, size and quantity, and we reply with a quote.

What you need
Where to send the quote

We use your details only to reply to this enquiry.